NOUVEAUTÉS ET ÉVÉNEMENTS

 

Novembre 2011
Nouveau catalogue "ESD et equipments pour l'electronique"
Les nouveautés principales sont les suivantes:
- Tapis de sol et Dalles en vinyl.
- Etablis TP.
- Etablis TPH.
- Station de test pour bracelets et chaussures
- Ioniseurs (aerostat PC, à grande portée XC, Guardian, CR2000, Aerobar 6685, Top Gun).
- Chaussures (Hospital et Class).
- Thermosoudeuses (à temperature constante et rotatives continues)
- Sahara.
- ESD Survey Kit
- meilleures performance de la nouvelle version Gigalab.


Novembre 2011
Salon "Productronica" in Munich

Participation de Iteco à l'exhibition électronique de Munich. Du 15 au 18 de novembre pavillon A4 stand 324.

On the booth, daily technical presentations will be held regarding:
Storage, Packing, Handling and Utilisation of : "Moisture Sensitive Devices"
(Components and Printed Circuit Boards) in compliance with Standards:   
IPC/J-STD-020Moisture Sensitivity Classification for SMD (Reflow)…..
IPC/J-STD-033
Handling,Packing, Shipping and use of MSD ……
IPC-1601 
Printed Board:Handling and Storage Guidelines.
Technical advice will be available for studying targeted solutions to customer needs.

Spokesman/Advisor:


Gabriele SALA
Electronic Assembly Technology Expert (IEC-TC 91).
IPC Member


Septembre 2011
Iteco c'est un IPC member

IPC is a global trade association dedicated to the competitive excellence and financial success of it's 3000 member companies which represent all facets of the electronic interconnect industry, including design, printed circuit board manufacturing and electronic assembly.


Juillet 2011
Gigalab-II

New and better performance Gigalab version. The new Gigalab-II has this measuring range:

10V de 1KΩ à 50GΩ (±5% ±0,6% par GΩ)
100V de 100KΩ à 1TΩ (±5% ±0,06% par GΩ)
250V de 500KΩ à 1TΩ (±5% ±0,045% par GΩ)
500V de 1MΩ à 1TΩ (±5% ±0,03% par GΩ)


Décembre 2010
ITECAD is born.
Free & Open Source EDA software, powered by Iteco, including:
- Schematic Capture
- PCB Layout
- Gerber generation
- Library editing.
   
Octobre 2010
New baking ovens line SAHARA
These ovens are easy to set and integrate a datalogger and a multifunction timer.
They can work in 4 modes:
1)SetPoint: 
The oven reaches a setpoint temperature and stays steady.
2)Countdown: 
It's like the SetPoint mode but with a time limit. After the countdown time is expired the oven stops.Time limit can be set from 1 minute to 999 hours and 59 minutes.
3)Programmed start-up:
It's useful when you want to start-up the oven on a precise date/time (for example at 6:30 on monday after the weekend the oven start-up to SetPoint 200°C)
4)Thermal programmer:
It's possible to edit on a PC and then download to the digital controller up to 10 programs with 100 steps each. In every step you can set: the temperature setpoint, the maximum gradient to reach it and the duration.

Novembre 2009
Nouveau catalogue "ESD et equipments pour l'electronique"
Les nouveautés principales sont les suivantes:
- Ghibli-II nouveaux armoires de déshumidification
- nouveaux instruments pour la mesure de l'humidité et de la température
- fours pour baking
- aspirateur ESD
- balance a suspendre pour grue
- thermosoudeuse rotatives continues
- film auto-adhesif en polyester
- brucelles de précision
 
Novembre 2009
Salon "Productronica" in Munich

Participation de Iteco à l'exhibition électronique de Munich. Du 10 au 13 de novembre pavillon A4 stand 324.
 
Avril 2009
Nouveau site web www.itecoinstruments.com pour l'instrumentation line
Pour une navigation facile, nous avons déplacé la ligne "Tachymètres, phonomètres, mesureurs de radioactivité" de ce site à un nouveau site Web dédié.
  
Mai 2008
Bias

ITECO sera présent à le BIAS 2008. L'exposition aura lieu, du mercredi 27 au samedi 30 mai, à le nouveau Milano Rho-Pero Trade Fair. 
Vous pouvez nous trouver dans le pavillon 18, stand F21-23.

 
Novembre 2007
Nouveau catalogue "ESD et equipments pour l'electronique"

Les nouveautés principales sont les suivantes:
- Nouvelle Counter-Pen cumule les fonctions de comptage et de marquage d'une boîte ou d'un emballage.
- Tractor 2 séparateur de cartes manuel et motorisé
- Nouvelles sièges en bois
- Santiago sandale ergonomique, légère et élégante
- Thermosoudeuse automatique verticale
- Nouveau thermosoudeuse a vide Vacuweld avec pompe à bain d'huile conseillée dans les zones EPA
 
Novembre 2007
Salon "Productronica" in Munich

Participation de Iteco à l'exhibition électronique de Munich. Du 13 au 16 de novembre pavillon A3 stand 217.
 
Avril 2007
Salon "SMT/Hybrid/Packaging" in Nuremberg

Participation de Iteco à l'exhibition électronique de Nuremberg. Du 24 au 26 de avril pavillon 9 stand 445.
 
Mars 2007
Ajouté Datalogger et les fonctions de commande à distance dans le armoire de déshumidification GHIBLI

Le Ghibli a maintenant un datalogger à l'intérieur et est possible obtenir ont enregistré les informations ou fair un commande à distance employant simplement un câble pour relier l'armoire à un PC. Les softwares nécessaires sont touts freeware.
Avec un kit facultatif il est possible de faire les mêmes choses en modalité wireless, en employant une connexion ZigBee.
 
Septembre 2006
Nouveau catalogue "ESD et equipments pour l'electronique"

Les nouveautés principales sont les suivantes:
- Nouveau Ghibli armoire de déshumidification 
- Vaculab thermosoudeuses a vide à aspiration externe
- Soufflerie ionisante 6480 dans la ligne ioniseurs
- Chariots pour Treston armoires 
- Thermosoudeuse à pince
- Labesert paniers de stockage de cartes électroniques pour les machines d’insertion automatique.
- Peinture conductrice noire
 
Septembre 2006
Bias

ITECO sera présent à le BIAS 2006. L'exposition aura lieu, du mercredi 20 au samedi 23 septembre, à le nouveau Milano Rho-Pero Trade Fair. 
Vous pouvez nous trouver dans le pavillon 18, stand E21-23.
 
Juillet 2006
GHIBLI armoire de déshumidification

In september will be available the new dry storage cabinet made in Iteco. The Ghibli complies IPC-JEDEC J-STD-033A and IEC 61340-5-1 standards and can store components at less than 5% of relative humidity.
 
Novembre 2005
Nouveau catalogue "ESD et equipments pour l'electronique"

Les nouveautés principales sont les suivantes:
- Ajouté polo shirt dans la ligne vêtements
- Ajouté des models dans la ligne thermosoudeuses

- Nouvelle palette en polypropylène conducteur
- Nouveau séparateur de cartes (Tractor)
- Nouveau testeur Wristlab avec sortie relais
- Ajouté porte-feeders dans la ligne Chariotte
- Bande de protection Kapton en version ESD
 
Novembre 2005
Salon "Productronica" in Munich

Participation de Iteco à l'exhibition électronique de Munich. Du 15 au 18 de novembre pavillon A3 stand 217.
 
Mai 2005
Traduction du site en français et en allemand

Le site ITECO est désormais rédigé en quatre langues : italien, anglais, français et allemand..
Le catalogue papier est disponible, depuis déjà plusieurs années, dans les langues suivantes : italien, anglais, français, allemand, espagnol, hongrois.
 
Mai 2005
Salon "Microelettronica" in Vicence

Participation de Iteco à l'exhibition électronique de Vicence dans le nord-est d'Italie. Du 5 au 7 de mai pavillon G1 stand 1606.
 
2004 December
Virtual Tour

There are 5 areas that you can visit:
- Office
- Manufacturing Unit
- Soldering Room
- Reception and Delivery Area
- Warehouse
 
2004 September
New ESD and Electronic Production Equipment catalogue
These are the most important news:
- Added a new portable scale in the County-W line
- New freeware software to interface all the county models to the serial port of a PC
- New PCB solder masking and solvent cleaning lines
- Added Dakar, W-Clog and M-Clog model in the dissipative footwear line
- New disposable coats
- New disposable shoe covers
- New AdesilexG19 glue for mats
- Changed the vacuum heat sealer line
- Added Trek520-2, an electrostatic voltmeter
 
2004 September
Bias

Iteco will be present at Bias 2004. The exhibition will be held from the 14th to the 17th of September at the Milan Trade Fair. Our stand number is pavillon 8 stand E34-36
 
2004 May
ESD Forum in Ancona on 28th of May

This forum is made to help people share news, resources and ideas about ESD. Iteco is one of the sponsor of this meeting.
 
2004 May
ESD Book 2004

Printed in italian or english this booklet is available for free. It's useful to both operators and ESD responsible, for a first approach to the ESD problematics, to help training tasks and also for the many reference to the standards.

Get your free ESD Book.
 
2004 January
Software to interface all the County models to the serial port of a PC

With this free software it's possible to write the counted pieces of your County to almost every Windows application. It's also possible to make tables with Code, Quantity, Date and Time using a barcode reader.
License: Freeware (gratis)
S.O.: Windows 95/98/ME/NT/2000/XP
File size: 50Kb for each version
County.exeVersion for the County models
(printer option required on the County)
CountyS.exeVersion for the County-S models
CountyW.exeVersione for the County-W models
(printer option required on the County-W)
 
2003 December
Vision 2000

Iteco is certified UNI EN ISO 9001 since april 23th 1993 
This month we've got the certification of the new standards ISO 9001:2000 (called Vision 2000)
ISO 9001:2000 is now the only certification standard in the family, having replaced the 1994 version of ISO 9001, ISO 9002, ISO 9003. 
 

2003 November
Productronica

Iteco attends this trade fair of electronic production since the last 15 years.  
We were in Munich at Hall A3, stand 117.

 


2003 October
New ESD and Electronic Production Equipment catalogue
It has been printed some days before Productronica exhibition. These are the most important news:
- Changed the County-W line
- Precision screwdrivers
- Changed the chairs and stools line
- Added a bigger box in the Newbox line (Newbox 80)
- Added a Labestat mat
- Added a Nora mat
- New humidity/temperature meter with RS232 output
- New mobile PCBs'store (Labecart)
- Improved the range and accuracy of Gigalab
  The new version of the megaohmmeter has these feature:
  10V
from 1KΩ to 20GΩ (±5% ±3% per GΩ)
  100V from 100KΩ to 200GΩ (±5% ±0,3% per GΩ)
  500V from 1MΩ to 1TΩ (±5% ±0,06% per GΩ)

 


2003 June
Software to Capture, Datalog and program the 9210 multifunction by RS232
License: Freeware
O.S.: Windows 95/98/ME/NT/2000/XP
File size: 54Kb


Multifunction 1.0.exe

 




2003 May
ESD Italian Forum

Iteco is member of the CEI CT101 teamwork (for ESD control) which organize the fifth ESD italian forum. The forum will be free and will take place the 9th of May at Padova during the Fortronic exhibition.

 


2003 April
Gigalab

It's now commerceable the new instrument made by Iteco. Gigalab was designed to measure high resistance value, it's easy and has a very competitive price. Gigalab and his probes allow shielded measure to avoid EMI, are in compliance with IEC61340-5-1 and are supplied with calibration certificate.
Measuring range:
10V from 1KΩ to 10GΩ (±5% ±5% per GΩ)
100V from 100KΩ to 100GΩ (±5% ±0,5% per G)
500V from 1MΩ   500GΩ (±5% ±0,1% per G)

Fully settable acoustic alarm.

 


2003 February
Control Company

New Instrument line. Iteco has started to distribute the products of CONTROL COMPANY. They are instruments to measure the environmental conditions: humidity, temperature, pressure, anemometers, weather station. Control Company is ISO 9001 certified and his produts are supplied with traceable certificate.

 


2002 November
Bias

Iteco was present at Bias 2002. The exhibition has taken place from the 19th to the 23th of November at the Milan Trade Fair. Our stand number was pavillon 12 stand C25-27

 


2002 October
New ESD and Electronic Production Equipment catalogue
It has been printed some days before Bias exhibition. These are the most important news:
- New counting scales models (8301.190, 8301.191, 8301.192, 8301.193)
- Test weights for scales
- New  Supercut/TS1 for loose radials preforming
- New Supercut/TOCF for tubed transistor preforming
- New chairs models
- Improved the Lander clog. Now is called New Lander adn is made in polyurethane
- Summer safety shoe with toecap
- Dissipative T-shirts 
- Improved the dissipative bubble pack that now is smooth on both side
- New digital megaohmmeter Gigalab made by Iteco 
- New instrumentation line for humidity/temperature acquisition

 


2002 October
New Tachometers and Instrumentation catalogue
These are the most important news:
- Mecha-opto tachometer
- Elapsed time counter
- Multi Engine Data
- New instrumentation line for humidity/temperature acquisition 

 

Iteco trading s.r.l. - Via Paisas 1 - 10094 Giaveno (TO) Italy - Tel. (+39) 011.9363013 - Fax (+39) 011.9365631 - E-Mail mail@iteco.it