Drylogger (included)

LogManager software (included)

Adjustable shelves

Technical specifications
Humidity range: <5% RH guaranteed, typical 2%RH
Colour: anthracite
Power supply: 230Vac
Structure: 1mm thick carbon steel with antistatic paint
Door: magnetic handles , magnetic sealers and antistatic glass
Wheel: 4 antistatic 3” wheels, two of them with brakes
Grounding wire: 940mm long
ESD paint: 10^3 - 10^9 Ω

Advantages about Ghibli-II
• Easy use:
It's plug and play, just connect it to the main supply without any settings and it will be stable at less than 5%RH (5%RH is guaranteed but the cabinets easily reach 2%RH).
• The dehumidifier units are always active and not controlled by any sensor. This avoid dangerous problems due to malfunction or drift of hygrometers.
• Easy calibration
Inside every cabinet there is a portable hygrometer (DryLogger 9265.300) visible through the glass of the upper door. You can return it for calibration anytime without problems: the cabinet
still works to the best.
• The portable instrument DryLogger can measure RH & Temperature values in several points inside the cabinet, and can record H/T and transfer the data to PC for graphing and analyzing. Made for very low humidity measurement can be used also for applications outside the cabinets.
• Modular design:
The dehumidifier modules are easy extractable with only a screwdriver. This allow easy reparation and grant the long life of the cabinet, over 20 years, as long as the metal structure last. This is our green policy.
• Smart magnetic handles with key lock at every door. The front of the cabinet is flat.
• 2 years warranty.

Data analysis
With the portable instrument DryLogger and the software LogManager supplied with every cabinet you can calculate the time intervals and percentage that exceed the 10%RH or 5%RH which leads to the estimation of the MSD floor life (“Floor Life” is the allowable time period after removal from a moisture barrier bag, dry storage or dry bake and before the solder process reflow).