DEPANELING MACHINE

Italiano English Deutsch Français Español Magyar


Depaneling machine for prescored PCB TRACTOR
TRACTOR depaneling machine separates the prescored PCB, in a very quick and economic way.
The compact and stable aluminium frame requires a minimum space.
The assembled PCB panel is shoved between the circular blades and is thereby separated.
The circular blades and guides are made of special steel to ensure a long time life.
The hand model is suggested only for small productions and prototype series.
Separation length: up to 350 mm
Thickness of panels: 0.8 - 3.2 mm
Maximum components’s height: 34 - 43 mm


7915.580: TRACTOR - PCB Hand depaneling machine
7915.582: TRACTOR - PCB Motorized depaneling machine 230VAC
7915.583: TRACTOR - PCB Motorized depaneling machine 230VAC / Titan blades



TRACTOR 2


TRACTOR 2M
TRACTOR 2
TRACTOR 2 separates both small and large pre-scored PCBs, the maximum separation length is 450mm.
The PCB is placed with its pre-scored groove onto the linear blade and the circular blade is then drawn by hand, or by motor, across the PCB. The clearance between the upper circular blade and the lower linear blade is adjustable


7915.560: TRACTOR 2 - PCB Hand depaneling machine
7915.564: TRACTOR 2M - PCB Motorized depaneling machine 230VAC


A = 1.0 - 3.2mm
B = min 0.3mm / max 0.8mm
C = min 0.25mm

 


Depaneling machine for prescored PCB

TRACTOR MILL
The Tractor Mill depaneling machine mills the routed tabs with the same quality of an automatic system at a lower costs.
The key feature of this machine is the easy and quick change of the milling cutter and the interchangeable rail (patent pending).
This rail is useful to assist the operator to place and drag the circuit until the cut is complete.
The particular shape of the rail avoids any damages to the assembled circuit: if the operator inserts it incorrectly it will not match the eyelet.
This rail gives a total protection against possible accidents under safety rules.
This manual depaneling machine has an integrated electric vacuum cleaner system therefore it’s easy to place it in every working area.
It has been designed and realized to solve stress problems, break or tearing out of the PCB's fibers that often occur using standard blades or manual tools and that are not tolerated with the increasing complexity and miniaturization.

Aspiration: three phase / single phase turbine
Weight: 55Kg
Mains supply: 400V/50Hz -230V/50Hz

Power: 1.3kW - 1.1kW
Depression: -17 kPa (-170 mBar) / -15 kPa (-150 mBar)
Air pressure: 7bar
Hose connection: Ø 8mm
Compressed air consumption: max. 210 Nl/min - average 140 Nl/min

Separatore di PCB Separatore di PCB Separatore di PCB
Choose the right mill: 1.5 - 2.5mm
Choose the right rail
Move the PCB array towards the mill The mill removes
the PCB’s tabs

7915.590: TRACTOR - MILL Depaneling machine with pedal

 

Iteco trading s.r.l. - Via Paisas 1 - 10094 Giaveno (TO) Italy - Tel. (+39) 011.9363013 - Fax (+39) 011.9365631 - E-Mail mail@iteco.it