for taped SMD component
counting. This machine works in a simple way by counting
the holes on the tape.
It can operate in two different
are counted from a zero reference, tape feed is motorized
and the counter automatically stops at the tape end, to
prevent loss of the total. Preset mode:the
desired component number is keyed on the keyboard and the
counter automatically stops when it reaches the
All functions are easy to operate by the help of
interactive messages on the graphic display.
In the count screen are always visible:
- Counting direction
- Pitch number (holes per component)
- Working mode (Totalizer, Preset or Rewind)
- Name of the operator
- Components counted
- Date & Time or the last barcode reading.
6 digits high efficiency leds
220 pc/sec (1 piece per hole)
divider from 1 to 99 (and multiplier 2,3,4 for 0402, 0201
and 01005 components)
400mm (standard configuration), 650mm (with
LCD with led backlight 160x104 pixel, visible area 74x46mm
Adjustable speed control
Step by step mode (1 component at a time)
Empty pocket check (optional)
Barcode reader input
Serial connection for label printer or PC
Selection of the operator (10 operators can be memorized
with 8 alphanumerical chars everyone)
Internal clock (1 week backup)
Datalogger that stores the last 500 counting data
Memory storage for subtotals
2 side handles for easy transport.
Aluminium made, inner 150 /
outer 350mm diameter, easily chargeable, height of the
tape from 8 to 56mm
8301.150: Support for reels with diameter > 400mm
It's small, lightweight and
ergonomic design, coiled cable included, a wider than
usual scan angle provides the ability to read a longer bar
code from a shorter distance, IP42 protection. The barcode
is connected and powered via a single cable, without the
hassle of two separate cables.
Thermal label printer
Direct thermal label printer
built for ease-of-use and durability, ac adaptor
110-230Vac and data cable included. Maximum print width is
104mm however the print is optimized for 57x51mm labels
Empty Pocket Check
SMD reels sometimes have missing components that most counters cannot detect. The County/S EVO equipped with EPC (model 8301.133 and 8301.143) not only counts the sprocket holes but also checks each pocket to verify that the component is really inside.
In case of missing parts the machine can stop immediately after a desired consecutive missing component number (Stop Number is selectable from 0 to 9)
When the count ends the display shows both
the number of detected components and the number of missing components.
As an additional benefit, the EPC option stops at the last components of the reel (SMD reels have about 400mm of tape leader without components). This make it easy to rewind.
NOTE: EPC option works only on black plastic tapes from 8 to 54mm of height.
Software "EVO Manager" to connect
the County-S EVO to a PC With this free
software it's possible to work in 3 modes:
- Custom Printer Label
to print the label on a printer connected to the PC
- Sendkeys to
send input to a target program (eg Microsoft Excel). The
target program will receive inputs as from a keyboard.
- Datalogger to
import on a table all the records of the last 500 works
performed. This table can be exported in a common
spreadsheet (eg Microsoft Excel).
File size: 604Kb