baking 40°C dry cabinets
The GHIBLI II dry cabinets are
ideal to provide low humidity and moisture-proof storage
for MSD (Moisture Sensitive Devices) like IC packages,
for example. They are complying with IPC/JEDEC
J-STD-033, ESDsafe, easy to use (no need to set any
panel button at all), and every cabinet include a
portable humidity/temperature meter DryLogger
with datalogging function.
LogManager software (included)
Humidity range: <5% RH
guaranteed, typical 2%RH
Power supply: 230Vac
Structure: 1mm thick carbon steel with
Door: magnetic handles ,
magnetic sealers and antistatic glass
Wheel: 4 antistatic 3” wheels, two of them with
Grounding wire: 940mm long
ESD paint: 10^3 - 10^9 Ω
• Easy use:
It's plug and play, just connect it to the main supply
without any settings and it will be stable at less than
5%RH (5%RH is guaranteed but the cabinets easily reach
• The dehumidifier units are always active and not
controlled by any sensor. This avoid dangerous problems
due to malfunction or drift of hygrometers.
• Easy calibration
Inside every cabinet there is a portable hygrometer (DryLogger
9265.302) visible through the glass of the upper door.
You can return it for calibration anytime without
problems: the cabinet
still works to the best.
• The portable instrument DryLogger
can measure RH & Temperature values in several
points inside the cabinet, and can record H/T and
transfer the data to PC for graphing and analyzing. Made
for very low humidity measurement can be used also for
applications outside the cabinets.
• Modular design:
The dehumidifier modules are easy extractable with only
a screwdriver. This allow easy reparation and grant the
long life of the cabinet, over 20 years, as long as the
metal structure last. This is our green policy.
• Smart magnetic handles with key lock at every door.
The front of the cabinet is flat.
• 2 years warranty.
With the portable instrument DryLogger
and the software LogManager supplied with every cabinet
you can calculate the time intervals and percentage that
exceed the 10%RH or 5%RH which leads to the estimation
of the MSD floor life (“Floor Life” is the allowable
time period after removal from a moisture barrier bag,
dry storage or dry bake and before the solder process
56W with baking
456W without baking
|56W with baking
856W without baking
||420W with baking
1220W without baking
|420W with baking
2020W without baking
Additional shelf 555x530x20mm, Ghibli-II 600L
8104.841: Additional shelf 1155x530x20mm,